Sometimes the freezer and fridge temperatures work improperly hence interfering with the normal working of the appliance. However, you can easily tell the problem and fix it as long as you understand the most common Sharp refrigerator error codes that display once something is amiss. Following the codes diagnosis, users can easily find solutions that make their appliances work best.
Sharp Refrigerator Error Codes
Sharp Refrigerator Error Codes are often displayed on the fridge as indicators of something wrong. They pop up only when a function of the appliance is amiss. They range from improper temperatures to power challenges.
Below is a list detailing some of the most famous error codes, their interpretation, and possible solutions. Sharp refrigerator owners may need to understand what specific errors mean and how to fix such problems.
SR Error Code – Failure Warning
The SR error occurs when a part or several parts of the fridge are out of order. Therefore, the fridge’s cooling system fails to work as it should. The best move to make in such cases is to get in touch with the Sharp helpdesk immediately.
To diagnose the issues, check for power failure. You could also confirm that the power plug is fixed on the socket properly. Confirm that the fuse is not blown and that there are no socket errors.
LF Error Code – Freezer Compartment Not Cold Enough
You are likely to see this error code after long periods of a power outage. Users should not thaw foods and instead work on using the food within a short period.
The freezer temperature should be set to colder temperatures, or apply the super freeze until everything returns to normal. While at it, avoid storing fresh food until the freezer compartment gets back to normal.
Part of the problem’s diagnosis includes checking if your temperature adjustments are correct. Also, check and confirm that the door is closed correctly, and that it does not stay open for a long time. Over-filling the fridge could also cause cooling errors.
However, sometimes doors refuse to close properly because of specific reasons. When this happens, you should check if any food packages are preventing the closing of the door.
Check the door compartments, drawers, and shelves to confirm that they have been appropriately placed. Find out also if there are any torn or broken gaskets and replace them. Lastly, you should check that the fridge is leveled on the surface.
LC Error Code – Refrigerator Compartment Not Cold Enough
Usually, the ideal temperatures for this compartment are +4 o C. The LC warning signals owners that their food is at risk and could spoil any time the error registers. It means that the level of cold is not significant enough to maintain the freshness of nay food.
To fix, set your refrigerator’s temperature to a colder value. Alternatively, set it to the supercooling mode and wait until the compartment gets to its average temperature. Avoid opening the fridge’s door at this time until the error goes off.
This error causes some unpleasant effects that interfere with the quality of food stored at the time. The fridge works best at ambient temperatures between +5°C and +43°C since it is meant for domestic use only.
LF and LC Error Code – Not Cold Enough Warning
This error code’s appearance indicates that both the refrigerator and freezer compartments are not working as they should. It comes up mostly when first starting the appliance and disappears when the two compartments get to the desired temperatures.
This problem should not be confused with edges of your fridge cabinet being warm, more so during summer. These surfaces tend to get warmer during the compressor’s operation, which is normal when it is hot.
To reset the compressor, find the refrigerator power cord’s location at the back of the appliance. You should by disconnecting the power cord from the wall outlet.
Next, turn off the fridge and freezer controls to “Off” or “0” inside the fridge. Once done, adjust the fridge as well as freezer controls. Finish by letting the fridge stay up to one day to adjust the temperature to a stable temperature.
HC Error Code – Refrigerator Compartment too cold
Sometimes, the refrigerator compartment gets too cold that food inside this area begins to freeze. To fix, establish that the “Supercooling mode” is not on. If it does, get the settings normal. Alternatively,
Minimize the refrigerator temperature values. Always ensure that the temperature settings are as recommended.
LOPO Error Code – Low voltage Warning
Your appliance will get to a steady level when the power supply lowers below 170 V. Fortunately, this is not an unfortunate error.
The refrigerator does this to protect its compressor. The error goes off when the recommended voltage is reached. Note that the fridge should never have temperatures below -10 for a long time.
Troubleshooting your Fridge Using Sounds
Apart from the codes that show up on your Sharp refrigerator, sounds are also common issues that indicate a problem. Users’ needs to identify and troubleshoot issues by listening to such sounds. These include:
Sometimes the refrigerator operates very loudly. Normal sounds from the fridge are those that occur when the compressor activates as a way of maintaining certain cooling levels. However, once the cooling levels are reached, the fridge should be silent.
In case you feel that there is an abnormal sound from within the fridge, it helps to check if the fridge is stable. Confirm that the legs are adjusted properly and that there is nothing behind the refrigerator. In the case of shelves and dishes (view on Amazon) vibrating, consider replacing them with better alternatives in the market.
This is one of the normal noises you may hear from your fridge. In most cases, it is the excess ice that cracks during the automatic defrosting process, or when the appliance is warmed or cooled when the appliance’s material expands.
Short cracking sounds:
These are heard when the compressor is switched off.
Water Flow Sounds:
These occur as water evaporates from the container during the defrosting process.
Normal motor/compressor sounds:
It is an indicator of a normally functioning compressor. It mainly occurs when activated. They are pretty normal sounds for a working Sharp refrigerator.
The noise of Air lowing:
This sounds like a normal fan. It normally occurs in the no-frost fridge when the system operates normally and is caused by air circulation.
Bubbling sounds and splash:
Bubbling sounds are heard when the refrigerant moves in the tubes.
Sharp refrigerators are excellent for home use. The fact that they are smart and will always show a potential error means that they can easily be managed.
The above-mentioned errors should help you diagnose and fix the issues that your refrigerator has. In addition to that, paying close attention to sounds could also direct you on whether the fridge functions normally or not.
Use this guide as a reference every time you feel there is a problem. Only call the expert when there is a real issue that needs technical advice. Otherwise, most of the errors occurring on this appliance are manageable and easily diagnosed.