How to Remove Mold from Washing Machine

Your washer is very important to your everyday life. The best thing about washers is they save you a ton of time. Every single piece of dirty clothing you put in your hamper and end up in the washer to wash. You walk away and come back to put it in the dryer. It saves you a lot of time since you don’t have to leave your house to wash your clothes. As much as the washer allows you to save time, it’s also another appliance in your house that can give you a few issues. One of the things that can happen to your washer is that you can see it growing mold.

Mold is a serious issue to deal with because it can easily spread and become widespread. As soon as you find the mold, you want to clean it and figure out what’s causing it so that you can stop it. You’ll also want to take all the necessary measures to prevent the mold in the future. Here’s how you can remove mold from your washing machine and other pieces of information that you should know if you’re dealing with this issue.

What Causes Mold in Washing Machines

There are a few different causes that you could be dealing with when it comes to your washing machine having mold in it. The thing about washing machines is that there are two types. There are front loading washing machines and top-loading washing machines. Either way, both of these machines can have mold and it’s very common, especially in appliances that deal with getting wet.

Important: As a homeowner, realizing that you need to waste another Saturday waiting for the landlord or handyman to come over to fix another damaged appliance is frustrating. It shouldn't feel like the norm to constantly have damaged appliances and systems in your home since it can come to a huge cost at the end of each year.

The Home Improvement Solutions eBook covers everything you need to do in your home when it comes to maintenance and improvement so you can avoid wasting another weekend waiting for someone to come to your rescue.  

Front loading washing machines are very popular, but their design makes them very prone to mold. The water in the detergent that you use constantly hits against the door so there’s a watertight seal to prevent leaks. The rubber gasket that helps make this seal also is a great place for mold and mildew to hide. This seal is so watertight that it also seems to block out even air. Because you might find yourself automatically closing the door as you take your clothes out, all of the water that was once tumbling around in the washer isn’t given a chance to dry. This is a very innocent mistake to make and it’s natural for people to close the doors that they open.

If you have a top load washer, then your issues are a little different. Top-load washers have a loose-fitting metal door that doesn’t seal very tightly. The drum dries very quickly between loads, which is why mold isn’t as prevalent, however you still might have mold build-up in the washer just from it being a wet, humid space. With top-load washers, there are few issues that you could be having.

One issue is that there are many energy efficient washing machines that choose to save energy, so a lot of this time mold flourishes in these washers. There’s also a correlation between mold and detergent use, since regular detergent in an energy-efficient washer might leave residue that can dampen and get mold. These are two things you want to be wary of if you have a top load washer.

No matter what kind of washer you have, you probably aren’t cleaning your washer at all. Since your washer is always wet with detergent in it, you probably don’t think you need to clean it at all. However, it doesn’t mean that you can escape doing a wipe down of your washer every once in a while since these thicker liquids can be very finicky and get stuck in your washer to become a mold breeding ground. If you have a mold issue, here are some tactics for cleaning mold from your washing machine door seal.

How to Remove Mold from Washing Machine

Before you begin cleaning the washer, you might want to gather your cleaning materials first. There are many things that people use to clean their washer. The first thing people use is the hot water. The next common thing that people use is bleach, but you want to be careful with this because you’ll need gloves and some manufacturers don’t allow cleaning of the gasket or dispenser with bleach. Just read your manual to check if bleach is an authorized cleaning product to use.

The next thing you can do is mix bicarbonate soda and water together to act as a detergent for your washer machine. Others might use a mix of white vinegar and warm water to wipe down the front of their washing machine because that can collect some detergent also. Mainly, if you want, you can use an all-purpose cleaner if you want to stay safe. While it doesn’t matter what cleaner you use as long as it’s manufacturer approved, you want to make sure you have a rag and gloves on so that you can keep your hands safe. You might want a face mask just so that you don’t have to breathe in any fumes that might come from the cleaner.

Clean Dispenser

The first thing you want to do is clean the dispenser. The dispensers are the area that pushes the detergent into your washer as it’s cleaning the clothes.

Front Loading

1. First, you have to remove the dispenser drawer. Usually, you can just pull it out easily.

2. Rinse the dispenser drawer under clean, warm water for a few minutes to loosen any buildup on it.

3. Then wipe the dispenser with a warm, wet washcloth. You can put cleaner on the washcloth or just use warm water if you want.

Top Loading

1. If you own a top-loading washer, cleaning the dispenser drawer means you’ll have to find it. It might be at the top of the agitator. The agitator is the plastic cylinder that’s in the middle of the washer drum where you put the clothes. It also might be a little harder if you have a make or model washer where the dispenser is located outside of the agitator. All you have to do is look in the manual of the washer to see if it tells you where the dispenser is located.

2. Now, once you find a dispenser, remove it and run it under warm water.

3. Wash your dispenser with a warm wet washcloth. You can use cleaner if you want to.

Make sure you clean the dispenser every 5 to 10 washes or once a month. You can also use a toothbrush to clean the dispenser if you have any hard-to-reach corners or buildup that has hardened.

Clean the Gasket

The gasket of the washer is the seal around the door that ensures it’s watertight. The gasket is what’s preventing your washer from leaking while it’s washing your clothes. Not only does this need to be maintained, but it also needs to be cleaned every once in a while since water is constantly hitting against it. Here’s how you clean your gasket.

1. Make sure the washer is turned off.

2. The first thing you want to do is open the washer door and remove all clothing items.

3. Then, you want to see if there’s any substances on the gasket between the lid and the drum. Cleaning any foreign substances that seem to be on the gasket.

4. Before you decide to use bleach, make sure it’s an approved cleaning product. If it is then you can combine bleach with a warm cup of water to wipe the diaphragm area. You should let it sit on the diagram for about 5 minutes and wipe it down. Do the same thing with an all purpose cleaner (View on Amazon) if you cannot use bleach on your gasket.

Make sure you use rubber gloves while you’re using cleaning products whether it is bleach or not.

Do a Cleaning Cycle

Not all washers have a sanitize cycle, but if you have a newer one, it probably does. Because clothes carry a range of bacteria, germs, and dirt, it’s very necessary that you have a sanitize cycle on your washing machine. The thing you have to know about renting a sanitizing cycle is that it’s only effective if your home has a hot water connection that works at a temperature of over 120 degrees Fahrenheit.

The sanitizing cycle uses high water temperature and a longer wash cycle to ensure that all of the bacteria and pathogens are killed. There’s also an extended rinse cycle and purge pump to make sure that any pathogens in the washer are removed.

You should run this cycle without any clothing in it because there is a chance that the high temperature of the water will shrink your clothes. What you have to do is look on the knobs of your washer and locate the sanitizing cycle on it. Turn the knob and select that washer cycle. You can add a cup of bleach, a cup of baking soda, 1/2 cup of enzymatic dishwasher detergent or a residue washer to ensure that your washer gets extra clean. After that, you’re done.

Don’t Wash Clothes with Mold in the Washing Machine!

Make sure that you don’t wash clothes while the washing machine has mold – it can make the clothes come out dirty and smell. If you’re always having problems with your washing machine, you need to know what’s causing the issue and if you’ll need to get the washing machine repaired or replaced. Having a working washing machine is crucial for any home.

If you want to save $100s on Home Repair, learn the most important home maintenance and home improvement procedures, and increase the value of your home, you can download our Home Improvement Solutions book now. With it, you’ll learn about a wide range of home maintenance and improvement topics, and you’ll be able to make your home a better place to live in. There are also a bunch of tips in there that’ll save you loads of time and money when it comes to repairs, DIY, and general home hacks that you can’t find anywhere else.

Whether you are a new homeowner, have owned a home for years, renting, or just love home repair and improvement topics, our guide will give you an in-depth explanation of many everyday home maintenance procedures. A lot of our readers use this book to increase the value of their homes, and they’ve saved a lot of money on things like repair that would have cost a professional handyman $100s of dollars.

Call a Professional to Clean Washer

There are professional mold remover teams that will come clean your washer for you. If you can pinpoint what is causing the mode on your washer because you’ve had your washer for a while, then you can usually clean it yourself. Sometimes, you notice mold when you’re just moving into a place and the washer has been used by the previous owner. This means you have no idea what they did to maintain their appliances and get mold on the washer machine. Depending on how long the mold was occurring, it could’ve spread all the way back into the drum, drain, and filter of the washer.

If you’re unsure of the circumstances that the mold is on the washer, then it’s best to hire professional mold removal service. They can take apart the machine and clean all of it correctly and safely. Also you likely wouldn’t be able to take apart the machine the way they could and put it back together, so you ‘ll get a better service this way. You also don’t have to take a chance to remove any of the harmful mold on your own since they have the proper equipment. Look into janitorial cleaning services for washers that offer mold removal services near you.

Now that you’ve cleaned the mold, you’ll want to make sure that doesn’t come back. Make sure you leave the top of the washer open after you do a load of laundry. Make sure you clean your detergent dispenser and gasket once every five washes or once a month. Keeping this up will ensure that you don’t get mold anymore and it’ll make your washing machine cleaner.