How to Remove Mold from Bathroom Ceiling

Do you have mold on your bathroom ceiling? It’s certainly an alarming sight to see, especially if it’s covering large portions of your ceiling. Not to mention it’s ugly to look at, terrible to breathe in and causing damage to your home that can turn out costly.

In other words, if mold is on your bathroom ceiling, you need to treat it immediately and not drag your feet about it.

How to Remove Mold From Bathroom Ceiling

1. Determine the Kind of Mold You Have

Now, you don’t have to break out a book to determine the exact species, no. Instead, you need to determine how deep the problem is by the It’s going to largely determine how you address the next few steps. Mold in your bathroom ceiling is coming from one of two sources: a leaky roof or the shower, and one is far more easier to remove than the other.

Important: As a homeowner, realizing that you need to waste another Saturday waiting for the landlord or handyman to come over to fix another damaged appliance is frustrating. It shouldn't feel like the norm to constantly have damaged appliances and systems in your home since it can come to a huge cost at the end of each year.

The Home Improvement Solutions eBook covers everything you need to do in your home when it comes to maintenance and improvement so you can avoid wasting another weekend waiting for someone to come to your rescue.  

What does it look like? If your bathroom ceiling has large black patches, then what you’re dealing with is mold called stachybotrys. And between the two molds, this one is going to be the most costly to get rid of. Why? Because it requires tearing away the bathroom ceiling. That’s the only way to get rid of it.

However, you should count yourself lucky if you see tiny black dots sprinkled all over the bathroom ceiling; known colloquially as “dew point” mold. It too is stachybotrys, but only affecting the surface of your ceiling. The effect is coming from a leak in your roof, but rather steam coming from your shower due to poor ventilation. Dew point mold is very easy to get rid.

2. Removing Dew Point Mold

Getting rid of dew point mold is a two-layered process. It isn’t enough to clean the mold, but you also have to foster a better environment. But first, let’s get rid of it.

What you’ll need is mold stain and mildew stain remover (View on Amazon), and RMR has a really great product for the job. All you have to do is spray it on the mold, give it 15 minutes and wipe it away. It gets rid of the mold as well as the stain. The product is really good at sinking into the substrates and killing the mold at the roots so that it doesn’t grow back. And yes, your drywall will be fine.

It isn’t recommended that you use bleach on dew point mold. It doesn’t sink into your drywall deep enough to kill the mold at the root, which is where RMR’s mold remover product does an excellent job at.

You aren’t done yet. The second step is two invest in a ventilation system. Even something as simple as a fan blowing out your bathroom will be a decent temporary fix until you properly ventilate your bathroom. If you don’t, then what ends up happening is the dew point mold comes back and you have to do it all over again.

3. The Bathroom Ceiling Has To Go

Unfortunately, if it’s the splotchy kind of mold your ceiling has to go or at the very least that portion has to be removed and the ceiling repaired. If you aren’t qualified to do this, then don’t. Removing only the portion of the ceiling with mold may not fix the issue. It’s a deeply routed problem that can seep into your entire ceiling and only a professional will have an idea to see the extent of the damage.

With that said, a professional will:

1. Block off the bathroom with a zipper door containment. When the mold is being removed, a zipper door will prevent the mold from escaping the bathroom and infected the rest of the house.

Note: This is done by using painter’s tape (this prevents the paint from being damaged) and 6 millimeter plastic sheets.

2. Gloves and a mask is worn during the process.

3. Pieces of the bathroom ceiling are then removed and disposed of properly.

4. A dehumidifier is used to pull out any excess humidity to prevent the spread of any leftover mold, including a fog to sanitize.

Note: You’ll find out that they’re incredibly thorough, taking every precaution to remove the mold and prevent further growth.

Mold Shouldn’t Be Growing on Your Bathroom Walls!

It’s important that you get the mold off your bathroom walls because it can be an eye sore. The reason for this mold is excess moisture so to help, you can install air vents in your wall. Getting rid of mold on your bathroom walls will improve the way it looks and it’s one form of home improvement, but there are many more.

If you want to save $100s on Home Repair, learn the most important home maintenance procedures, and increase the value of your home, you can download our Home Improvement Solutions book now. With it, you’ll learn about a wide range of home maintenance and improvement topics, and you’ll be able to make your home a better place to live in. There are also a bunch of tips in there that’ll save you loads of time and money when it comes to repairs, DIY, and general home hacks that you can’t find anywhere else.

Whether you are a new homeowner, have owned a home for years, renting, or just love home repair and improvement topics, our guide will give you an in-depth explanation of many everyday home maintenance procedures. A lot of our readers use this book to increase the value of their homes, and they’ve saved a lot of money on things like repair that would have cost a professional handyman $100s of dollars.

Bottom Line

Mold of any kind in your bathroom is nothing to play around with. It’s a problem that must immediately be addressed or it can cause bodily harm to your system. Mold is never something you want to be breathing in constantly, especially if you have kids.