How to Fix a Door That Swings Open or Closed


A Swinging door can be annoying, and it can be scary at night when the door swings open or closed and no one is there. When you push a door, you expect it to stay that way and if it doesn’t, it isn’t a properly functioning door – doors are meant to put a barrier between two rooms.

Sometimes you don’t want the door fully to shut and you just want to keep it hanging in the middle – If your door’s hinges are messed up, the door can open itself. If the hinges are messed up, it can also cause problems when trying to close the door fully – you may have to lift the whole door up slightly just to get it closed. Luckily with a few tools, you can get your door to move how you want it.

Reasons the Door Opens or Closes by itself

There are a few obvious reasons why your door won’t stay where it is. If you installed the door yourself or got a rookie to do it, mistakes may have been made during the process which is why you’ve now got a door that doesn’t function properly.

Important: If you use Amazon a lot, you can enjoy FREE same-day delivery as well as FREE Two-Day Shipping on millions of items for 30 days with an Amazon Prime free trial. Sign up in 2 seconds with the click of a button if you're already logged into Amazon.

If you're still struggling to find good shows to watch on Netflix, you can also enjoy instant streaming of thousands of movies and TV shows. Other Prime perks include unlimited, ad-free access to over a million songs, borrowing books for FREE from the Kindle Owners' Lending Library, and skipping the lines with 2-hour delivery on a wide selection of fresh ingredients.

The Wind

One of the few reasons why your door opens or closes itself is because of the wind. If your door is lightweight and made out of wood, drafts can easily swing the door in different directions. Drafts can come from different places in your home. If you’ve left your room windows open, wind can easily cause the door to shut.

Sometimes you may hear your door slam shut – this is likely to happen on a very windy day and your door can be controlled easily. Drafts can also come from places like your fan – if you have a fan in your room, it can cause the door to swing by itself. Other places wind can come from are air vents and the spaces between your light bulb – air can easily flow through these places cause the door to move. Another way to tell if it’s the wind is if you hear howling and whistling noises coming through the window or door.

Change in Pressure

Your door can easily move if the pressure within the room changes. If your door is light weight and can easily be moved, when you shut or open your window, a lot of pressure can be released or build up in the room causing the door to slam shut or open. This is the law of physics. This is more likely to happen when you shut the window door.

Someone’s Messing with You

If your door doesn’t move by itself occasionally, there’s a chance that someone playing a prank on you. I’m sure you wouldn’t be here if your door opened or closed by itself once. If someone’s messing with you, they may do it often to make you believe that there are ghosts in your room. To check this, make sure to quickly run to the door when it moves to check if anyone’s there. If no one’s there, there’s another reason why the door moves by itself.

The Door is Not Working Properly

It may not be the wind or someone trying to play a prank on you, it could just be that your door isn’t working properly. It may be too old to the point its been overused and now it doesn’t function as a properly working door. The hinges or the screws may be worn out which is why the door just moves on its own this.


If you have a cat or a dog, or any small pet for that matter, they could be going in and out of the door and this can make it seem like the doors opening by itself. The lower part of your door may not be visible to you which is why you can’t see them go through the door. Sometimes they come in and out and it may look like the door has moved itself when this isn’t the case. If this happens again, you can just call your pets name to see if they’ll respond – this way, you can tell if this was them.

Installed Incorrectly

One of the most likely reason why your door will move itself is if it was incorrectly installed. When a door isn’t installed properly, it can swing due to its own weight. This means that the door is slightly tilted to the side it opens or closes on. To test this, you can grab your door by the handle and move it up and down. If you notice that the door moves slightly, then you can conclude that the door wasn’t installed properly.

The Hinges Are Incorrect

If there’s a problem with your door’s hinges, this can cause them to move by themselves. Overtime your hinges can get worn out after being moved so many times. If the hinges are bent, loose or distorted, then you’ll need to correct them – in most cases, it’s the hinges that’ll cause the problem.

How to Fix a Swinging Door

Since the problem is likely to be with the hinges, you’ll need to correct them. Overtime, a door has been used so many times that the screws and hinges on the door can start to become loose, bend or ware out over time. To fix this, you’re going to have to make sure that the screws are tightly secured to the hinges. You may also need to manipulate the hinge pin to make sure that there’s enough friction, so the door doesn’t swing by itself. To do this, you’ll need shims, a hammer, large nails and a screwdriver. All of these tools will help you get your door back into the correct position.

Correcting Screws

1. The first thing you’ll need to do is to examine the top corner of your door to see if its catching the frame. Overtime, door hinges can loosen, and this can cause the door to hang downwards – when you open your door, this can cause it to open further or close even more. If the top corner of your door touches the door frame, it can cause problems with the door and you’ll need to adjust the hinges. Another way to tell if this is the case is to look at the gap between the door and the frame – if the gap widens as you move the door away from the hinge, the door isn’t correctly installed.

2. Tightening the door hinges can fix this problem – to do this you’ll need to pull the door back towards the jamb which is the hinged part of the door frame so it doesn’t catch the frame when you try and close the door. From here, you’ll need to tighten the screws on the hinges as much as possible. Once you’re done, you can try opening and closing the door again to see if the problem is fixed.

3. If the problem with the door continues, you can try loosening the screws in the middle. This will free up the door a little bit and if It was too tight, loosening the middle screws can free it up a bit.

4. You can try screwing in some longer screws – if the problem with the door continues, you can try screwing in some longer screws. If you have some 3-inch screws lying around, you can screw these into the top door hinge. Longer screws will help bring the door back towards the jamb. Make sure to tight the screws until they’re secured tightly against the jamb. Once you’re done, you can try closing the door to see if the problem still continues. If it does, you’ll need to adjust the pin in the hinges.

Tightening the Hinge

1. Close the door and stand on the side of the door where you can see the hinges. To assist you, you’ll need to get a shim and slide in between the jamb and the door – this is the tiny gap between the door and the wall on the side the door the handle is on. Make sure to slide the shim at the top.

2. You’ll need to get the pin out of the hinge. To do this, you need to grab a large nail and hold it against the base of the pin at the bottom of the hinge. Use a hammer and tap the bottom of the nail so that the top of the nail pushes the pin out of the hinges. When it comes out, check if the pin is straight or not. This is important because you’ll have to determine whether the pin needs to be straightened or bent. If you notice that the pin is straight, you can put it on something sturdy and use a hammer, so it bends ever so slightly.

If you’ve assessed the pin and you’ve noticed that it’s slightly bent, you’ll need to put it in something sturdy and straighten it slightly. The reason you want to bend it is so that there can be some friction between the door hinges – this will stop the door from moving by itself since the hinges are so stiff. The reason you want to straighten the pin is so that there’s no disruption in the door hinges that’s causing it to move by itself.

3. Next, you need to insert the pin back where you found it. You need to put the put inside and tap it gently with your hammer. Once you’re done, you can remove the shim and test the door. If you notice that the door is still swinging, you’ll need to put the shim back in and repeat the same process with the lower hinge. After you’ve repeated this process, you can remove the shim from the door and the jamb and test the door again.

You Need to Know This About Your Doors!

If you’re always having problems with your doors, you need to know what’s causing the issue and if you’ll need to get the doors repaired or replaced. Having functioning doors is crucial for any home, and fixing it is just one form of home improvement, but there are many more.

If you want to save $100s on Home Repair, learn the most important home maintenance and home improvement procedures, and increase the value of your home, you can download our Home Improvement Solutions book now. With it, you’ll learn about a wide range of home maintenance and improvement topics, and you’ll be able to make your home a better place to live in. There are also a bunch of tips in there that’ll save you loads of time and money when it comes to repairs, DIY, and general home hacks that you can’t find anywhere else.

Whether you are a new homeowner, have owned a home for years, renting, or just love home repair and improvement topics, our guide will give you an in-depth explanation of many everyday home maintenance procedures. A lot of our readers use this book to increase the value of their homes, and they’ve saved a lot of money on things like repair that would have cost a professional handyman $100s of dollars.

Door Still Swinging?

If your door is still opening and closing by itself, there are a few more things you can do to stop it. After adjusting the hinges, you may be frustrated to see your door is in the same situation. Down below are some light-hearted things you can do to stop this problem from happening.

Door Stopper

Another thing you can do to stop your door from moving by itself is to use a door stop. A door stopper is some thing you use to jam your door with. It can either block the door from moving, or it can be jammed under the door. You can be creative with your door stopper and they can be any household item. If you want some actual door stoppers (View on Amazon), they won’t cost you much. Once they’re under your door, it should stop the door moving immediately. The only downside to them is that you have to remove them If you want to shut your door.

Shut Your Windows

If you’ve adjusted the door and you still notice that it’s moving by itself, your door may not be the problem – drafts coming in and out of your room could be the cause of the door problem. To fix this, you need to shut your windows and turn off the fan. If the problem bothers you that much, these are the necessary steps you’ll have to take.